Поиск

Промышленные товары

Epoxy Ara Kat Astar

Код товара:842-7701

It is an epoxy-polyamide resin-based, two-component, anticorrosive and high-adhesion intermediate coat primer. It provides long-term resistance and protection to the system.

Technical Information

Density (20°C , gr/cm³ ) : 1,50 - 1,54 (depending on color)
Drying Time (20°C) :  
    Powder drying : 2-2,5 hours
    Touch dry: 6-7 hours
    Floor admission : 8-24 hours
    Full drying : 7 days
Solid Matter : 74,0 - 78,0
Thinner : Epoxy Thinner (971-0771)
Thinning Rate : % 20-25
Hardener : 849-0086
Mixing Ratio (By Weight) : 7/1
Mixture Life (20° C) : 3-4 hours
Paintable Area : When applied to leave a dry film thickness of 40-50 µ in one coat, 7-8 m² of area can be covered with 1 liter. (Excluding losses)

Instructions

It should be cleaned so that oil, dirt, old paint, rust and rolling mill residues are left on the surface. Sandblasting at (Sa 21/2) grade is recommended for surface cleaning. Famous Epoxy Intermediate Primer (842-7701) can be applied with a brush, roller, air or airless gun. Thinner is not required for applications with an airless gun. Between coats, a break of at least 6-8 hours should be given. If this period exceeds 48 hours, the surface must be sanded.

Epoxy Ara Kat Astar / Краска и грунтовка Эпокси / Промышленные товары / Продукты - Katsan Group

Поиск

Промышленные товары

Epoxy Ara Kat Astar

Код товара:842-7701

It is an epoxy-polyamide resin-based, two-component, anticorrosive and high-adhesion intermediate coat primer. It provides long-term resistance and protection to the system.

Technical Information

Density (20°C , gr/cm³ ) : 1,50 - 1,54 (depending on color)
Drying Time (20°C) :  
    Powder drying : 2-2,5 hours
    Touch dry: 6-7 hours
    Floor admission : 8-24 hours
    Full drying : 7 days
Solid Matter : 74,0 - 78,0
Thinner : Epoxy Thinner (971-0771)
Thinning Rate : % 20-25
Hardener : 849-0086
Mixing Ratio (By Weight) : 7/1
Mixture Life (20° C) : 3-4 hours
Paintable Area : When applied to leave a dry film thickness of 40-50 µ in one coat, 7-8 m² of area can be covered with 1 liter. (Excluding losses)

Instructions

It should be cleaned so that oil, dirt, old paint, rust and rolling mill residues are left on the surface. Sandblasting at (Sa 21/2) grade is recommended for surface cleaning. Famous Epoxy Intermediate Primer (842-7701) can be applied with a brush, roller, air or airless gun. Thinner is not required for applications with an airless gun. Between coats, a break of at least 6-8 hours should be given. If this period exceeds 48 hours, the surface must be sanded.