Поиск

Товары для мебели

NC Matt Topcoat

Код товара:611-Seri

It is an air drying, NC based topcoat paint. NC MATT TOPCOAT PAINT has very quick-drying property.

Place of use

NC MATT TOPCOAT PAINT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. It is applied on the surfaces prepared with NC, Polyurethane or Polyester primer.

Technical information

Density (20°C , gr/cm³ ) : 1,14 - 1,18(White) / 1,06-1,10(Black)
Drying Time (20°C) :  
    Touch dry: 30-35 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 44,0 - 48,0(White) / 43,0-47,0(Black)
Thinner : NC super thinner (961-0631)
Dilution Ratio : % 70-80
Gloss : 5-10
Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)

Instructions

It is applied as spraying. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product is applied on surfaces prepared with NC, polyurethane or polyester primer and sanded with sandpaper no:220-400 as two/three coats.15 min. should be given between each coat. For the applications excluding spray; it should be consulted to our technical service department.

NC Matt Topcoat / Товары на целлюлозной основе / Товары для мебели / Продукты - Katsan Group

Поиск

Товары для мебели

NC Matt Topcoat

Код товара:611-Seri

It is an air drying, NC based topcoat paint. NC MATT TOPCOAT PAINT has very quick-drying property.

Place of use

NC MATT TOPCOAT PAINT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. It is applied on the surfaces prepared with NC, Polyurethane or Polyester primer.

Technical information

Density (20°C , gr/cm³ ) : 1,14 - 1,18(White) / 1,06-1,10(Black)
Drying Time (20°C) :  
    Touch dry: 30-35 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 44,0 - 48,0(White) / 43,0-47,0(Black)
Thinner : NC super thinner (961-0631)
Dilution Ratio : % 70-80
Gloss : 5-10
Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)

Instructions

It is applied as spraying. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product is applied on surfaces prepared with NC, polyurethane or polyester primer and sanded with sandpaper no:220-400 as two/three coats.15 min. should be given between each coat. For the applications excluding spray; it should be consulted to our technical service department.