1K Galvanized Primer

1K Galvanized Primer

1K Galvanized Primer

Product code:862-7515

1K Galvanized Primer is a one-component, special resin combination protective primer.

Place of use

It is especially applied as sheet primer or filler primer, depending on the intended use. The product is used to perfect the adhesion of paint coats on light metal surfaces such as aluminum, galvanized, stainless steel. It is extremely elastic, adapts to the stretching and bending of the metal, and maintains its strength.

Instructions

Galvanized primer prepares the surface to increase the adhesion of the primer and topcoats to be applied later. Before application, the surface must be cleaned of oil, rust, dust, and dirt. After it is brought to the application viscosity with cellulosic thinner, the film thickness should not exceed 20 microns.

Technical information

Density (20°C, gr/cm³): 1.02 – 1.06 (depending on color)
Drying time (20°C):
Dust-free drying time: 3-5 minutes
Dry-to-touch time: 6-8 minutes
Layer application process: 2-3 hours
Solids: 40.0 – 44.0 (depending on color)
Thinner: Cellulosic Super thinner (961-0631)
Thinning ratio: 30-40%
Coating capacity: When applied to leave a dry film thickness of 15-20 µ in one coat, an area of 13-15 m² can be covered with 1 liter (excluding losses).