Search

Manufacture products

Epoxy Non Stop Astar

Product code:822-7700

It is a special epoxy resin based, two component, surface tolerant, solvent based primer containing anticorrosive pigment. Famous Epoxy Non Stop Primer; Wet paint can be applied on gray (822-7700) in a short time. Its adhesion, elasticity, corrosion and water resistance are excellent. Its most prominent feature is that it can be cured at low temperatures.

Place of use

It can be applied to all metal surfaces.

Technical Information

Density (20°C , gr/cm³ ) : 1,50 - 1,54
Drying Time (20°C) :  
    Powder drying : 30-35 minutes
    Touch dry: 2 hours
    Full drying : 7 days
Solid Matter : 77,0 - 81,0
Thinner : Epoxy Thinner (971-0711)
Thinning Rate : % 10-15
Gloss : Semi Matte
Hardener : 829-0045
Mixing Ratio (By Weight) : 6/1
Mixture Life (20° C) : 7-8 hours
Paintable Area : When applied to leave 60 µ dry film thickness in one coat, 6-7 m² area can be covered with 1 lt. (Excluding losses)

Instructions

It is applied as a spray (Air-airless spray). All surfaces to be painted must be clean and dry. Surface preparation processes such as blasting or phosphating provide increased performance. Wait for a minimum of 45 minutes at 20°C for the final coat of paint to be applied on it. Recommended application thickness: 60 µ kfk (dry film thickness)