Search

Furniture products

NC Astar Topcoat

Product code:612-Seri

1016-White, 2003-Oxite Yellow, 6001-Light Brown, 6004-Tumbled Brown, 7000-Gray, 9000-Black. Also color tones.

Place of use

CELLULOSIC PRIMER (612-SERIES) is formulated to be applied successfully on MDF surfaces thanks to its fast drying, easy sanding and high covering power.

Technical Information

Density (20°C , gr/cm³ ) : 1,28 - 1,46 (Depending on the color).
Solid Matter : 60,0 - 67,0 (Depending on the color).
Thinner : Cellulosic Super Thinner (961-0631)
Thinning Ratio : 100/60-70
Sanding Time (20°C ,300 gr/m²) : 1,5-2 hours
Paintable Area : When applied to leave a dry film thickness of 35-40 µ in one coat, an area of 8-10 m² can be covered with 1 liter. (Excluding losses)

Instructions

Before the application, wooden surfaces should be cleaned of dust after appropriate sanding. It should be brought to the appropriate viscosity according to the application method. Depending on the desired surface saturation, two to five cross coats should be applied, leaving a drying time of 10-15 minutes between coats. It should be sanded 2-3 hours after the application of the last coat and the cellulosic topcoat paint should be applied. When it is desired to use application systems and other tools and equipment other than spray application, our technical service unit should be applied.