İki komponentli, poliüretan esaslı, reaksiyon kürlenmeli bir astardır. SPECIAL POLİÜRETAN LAKE ASTAR (232-SERİ) yüksek doldurma gücüne sahiptir. Ahşap yüzeylere çok iyi yapışan elastik bir film verir. Kolay zımparalanır ve üzerine uygulanacak sonkat boyalara çok düzgün bir yüzey sağlar.
POLYURETHANE SPECIAL PRIMER (232-SERIES) is formulated as primer for internal use on solid wood and MDF with the purpose of decoration. It allows NC, polyurethane and acrylic pigmented topcoats to be applied on it.
| Density (20°C , gr/cm³ ) | : | 1,53 -1,57 (Depends on color) |
| Drying Time (20°C) | : | |
| Touch dry | : | 25-30 minutes |
| Thoroughly Drying | : | 24 hours |
| Soldi Matter | : | 68,0 - 72,0 |
| Thinner | : | NC Super Thinner (961-0631) |
| Dilution Ratio | : | % 20-30 |
| Hardener | : | 229-0319 |
| Mixing Ratio ( By weight ) | : | 3/1 |
| Sanding Time(20°C ,300 gr/m²) | : | 2-3 hours |
| Pot Life (20° C) | : | 2-3 hours |
| Coverage | : | An area of 9-11 m² is coated by using 1 lt of this product remains a dry film of 45-50 microns (excluding application loss) |
Prior to application, wooden surfaces must be free of dust after proper sanding. The product should be mixed with hardener and diluted with NC super thinner (961-0631) to application viscosity. Depending on the desired surface, two/three cross coats should be applied with 15-20 minutes drying time intervals. 3-4 hours/20°C after the POLYURETHANE SPECIAL PRIMER (232-SERIES) application; the surface must be first sanded with sandpaper grid no:220 and the with sandpaper grid no:400 to prepare the surface for pigmented topcoat application.
