Search

Furniture products

Metalux NC Metallic Paint

Product code:631-Seri

It is an air drying, NC based metallic effect paint. METALUX NC METALLIC PAINT has very quick-drying property.

Place of use

METALUX NC METALLIC PAINT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. 

Technical Information

Density (20°C , gr/cm³ ) : 0,94 - 0,98 (Depends on color)
Drying Time (20°C) :  
    Touch dry: 35-40 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 31,0-35,0 (Depends on color)
Thinner : NC Super Thinner (961-0631)
Dilution Ratio : % 40-50
Coverage : An area of 15-17 m² is coated by using 1 lt of this product remains a dry film of 10-15 microns (excluding application loss)

Instructions

It is applied as spraying by spray gun which has 1,4-1,6 mm nozzle diameter. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product diluted % 40-50 by ÜNLÜ NC SUPER THINNER (961-0631) is applied on surfaces prepared with NC or polyurethane primer and sanded with sandpaper no:220-400 as one-two thin coat with raucous trigger. Polyurethane or acrylic clear topcoat can be applied on it after min.24 hours.

Metalux NC Metallic Paint / NC System Products / Furniture products / Products - Katsan Group

Search

Furniture products

Metalux NC Metallic Paint

Product code:631-Seri

It is an air drying, NC based metallic effect paint. METALUX NC METALLIC PAINT has very quick-drying property.

Place of use

METALUX NC METALLIC PAINT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. 

Technical Information

Density (20°C , gr/cm³ ) : 0,94 - 0,98 (Depends on color)
Drying Time (20°C) :  
    Touch dry: 35-40 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 31,0-35,0 (Depends on color)
Thinner : NC Super Thinner (961-0631)
Dilution Ratio : % 40-50
Coverage : An area of 15-17 m² is coated by using 1 lt of this product remains a dry film of 10-15 microns (excluding application loss)

Instructions

It is applied as spraying by spray gun which has 1,4-1,6 mm nozzle diameter. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product diluted % 40-50 by ÜNLÜ NC SUPER THINNER (961-0631) is applied on surfaces prepared with NC or polyurethane primer and sanded with sandpaper no:220-400 as one-two thin coat with raucous trigger. Polyurethane or acrylic clear topcoat can be applied on it after min.24 hours.