Search

Furniture products

NC Pigmented Topcoat

Product code:611-Seri

It is an air drying, NC based topcoat paint. NC PIGMENTED TOPCOAT has very quick-drying property.

Place of use

NC PIGMENTED TOPCOAT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. It is applied on the surfaces prepared with NC, Polyurethane or Polyester primer.

Technical information

Density (20°C , gr/cm³ ) : 0,92 - 1,18 (Depends on color)
Drying Time (20°C) :  
    Touch dry: 35-40 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 32,0 - 50,0 (Depends on color)
Thinner : NC super thinner (961-0631)
Dilution Ratio : % 90-100
Gloss : > 85
Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)

Instructions

It is applied as spraying. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product is applied on surfaces prepared with NC, polyurethane or polyester primer and sanded with sandpaper no:220-400 as two/three coats.15 min. should be given between each coat. For the applications excluding spray; it should be consulted to our technical service department.

NC Pigmented Topcoat / NC System Products / Furniture products / Products - Katsan Group

Search

Furniture products

NC Pigmented Topcoat

Product code:611-Seri

It is an air drying, NC based topcoat paint. NC PIGMENTED TOPCOAT has very quick-drying property.

Place of use

NC PIGMENTED TOPCOAT is formulated for internal use on solid wood and veneer of furniture with the purpose of decoration. It is applied on the surfaces prepared with NC, Polyurethane or Polyester primer.

Technical information

Density (20°C , gr/cm³ ) : 0,92 - 1,18 (Depends on color)
Drying Time (20°C) :  
    Touch dry: 35-40 minutes
    Thoroughly Drying : 24 hours
Soldi Matter : 32,0 - 50,0 (Depends on color)
Thinner : NC super thinner (961-0631)
Dilution Ratio : % 90-100
Gloss : > 85
Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)

Instructions

It is applied as spraying. To obtain the desired pattern and vitality of natural-looking surfaces of wood, the product is applied on surfaces prepared with NC, polyurethane or polyester primer and sanded with sandpaper no:220-400 as two/three coats.15 min. should be given between each coat. For the applications excluding spray; it should be consulted to our technical service department.