Wooden surface is sanded properly and cleaned from dust before the application.Depending on the application method, it should be brought to proper viscosity. Acccording to the required film thickness, it should be applied as three/five coats with 10-15 min. intervals between each layer. It has to be  sanded after min.two hours and then clear topcoat must be applied. For the applications excluding spray; it should be consulted to our technical service department.

• Density (20°C , gr/cm³ ) : 0,91 - 0,95
• Soldi Matter : 26,0 - 30,0
• Thinner : NC Super Thinner (961-0631)
• Dilution Ratio : % 80-90
• Sanding Time(20°C ,300 gr/m²) : 1,5-2 hours
• Coverage : An area of 8-10 m² is coated by using 1 lt of this product remains a dry film of 35-40 µ (excluding application loss)

Wooden surface is sanded properly and cleaned from dust before the application.Depending on the application method, it should be brought to proper viscosity. Acccording to the required film thickness, it should be applied as three/five coats with 10-15 min. intervals between each layer. It has to be  sanded after min.two hours and then clear topcoat must be applied. For the applications excluding spray; it should be consulted to our technical service department.

• Density (20°C , gr/cm³ ) : 0,91 - 0,95
• Soldi Matter : 26,0 - 30,0
• Thinner : NC Super Thinner (961-0631)
• Dilution Ratio : % 80-90
• Sanding Time(20°C ,300 gr/m²) : 1,5-2 hours
• Coverage : An area of 8-10 m² is coated by using 1 lt of this product remains a dry film of 35-40 µ (excluding application loss)