Search

Synthetic System Products

Ünlü Parquet Varnish, Semi Matt

Product code:115-4552

It is an air drying, urethane alkyd based, mono component wood varnish. Due to its structure it is tough, elastic and is resistant to  stratch, abrasion, water and household chemicals.

Place of use

It is used at residential, office and other buildings on all sorts of wooden parquet as topcoat varnish.

Instructions

Raw wooden parquet surfaces must be clean and dry prior to application to the surface.In applications for repairs, wooden surface should  be cleaned in a very good way of old varnish. Parquet varnish; glossy should be applied with brush as at least  three coats with 24-hour intervals.Between each coat it should be sanded slightly.I does not require thinner. However, synthetic thinners should be used in cases where thinning required.

Technical information

  • Density (20°C , gr/cm³ ) : 0,90 - 0,94
  • Soldi Matter : 52,0 - 56,0
  • Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)
Ünlü Parquet Varnish, Semi Matt / Synthetic System Products / Furniture products / Products - Katsan Group

Search

Synthetic System Products

Ünlü Parquet Varnish, Semi Matt

Product code:115-4552

It is an air drying, urethane alkyd based, mono component wood varnish. Due to its structure it is tough, elastic and is resistant to  stratch, abrasion, water and household chemicals.

Place of use

It is used at residential, office and other buildings on all sorts of wooden parquet as topcoat varnish.

Instructions

Raw wooden parquet surfaces must be clean and dry prior to application to the surface.In applications for repairs, wooden surface should  be cleaned in a very good way of old varnish. Parquet varnish; glossy should be applied with brush as at least  three coats with 24-hour intervals.Between each coat it should be sanded slightly.I does not require thinner. However, synthetic thinners should be used in cases where thinning required.

Technical information

  • Density (20°C , gr/cm³ ) : 0,90 - 0,94
  • Soldi Matter : 52,0 - 56,0
  • Coverage : An area of 10-12 m² is coated by using 1 lt of this product remains a dry film of 35-40 microns (excluding application loss)