The surface must be cleaned by sandblasting (Sa 21/2) until a shiny metal is obtained. ÜNLÜ Epoxy Primer needs to be applied to the cleaned surface within a maximum of 8 hours. ÜNLÜ Epoxy Primer product, which is compacted in the specified proportions and thinned to the application viscosity in the specified ratio, is applied with a spray gun, a brush, or a roller. It is recommended to wait at least 8 hours during the application of the primer between the layers. It can also be dried with a non-high temperature oven system to accelerate drying. ÜNLÜ Epoxy Topcoat Paint is applied as a top coat on the product. 

• Density (20°C, gr/cm³):  1.52 – 1.60 (depending on color)
• Drying time (20°C)       
• Dust-free drying time: 20-30 minutes 
• Dry-to-touch time: 1-2 hours
• Layer application process: 8-24 hours
• Full drying time: 7 days 
• Solids: 72.0 – 80.0 (depending on color)
• Thinner: Epoxy Thinner (971-0771)
• For spray applications: 20-25%
• For roller applications: 15-20%
• For brush applications: 10-15%
• Hardener: 849-0040
• Mixing ratio: 3/1
• Pot life (20° C): 7-8 hours
• Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 8-10 m² can be covered with 1 liter (excluding losses)

The surface must be cleaned by sandblasting (Sa 21/2) until a shiny metal is obtained. ÜNLÜ Epoxy Primer needs to be applied to the cleaned surface within a maximum of 8 hours. ÜNLÜ Epoxy Primer product, which is compacted in the specified proportions and thinned to the application viscosity in the specified ratio, is applied with a spray gun, a brush, or a roller. It is recommended to wait at least 8 hours during the application of the primer between the layers. It can also be dried with a non-high temperature oven system to accelerate drying. ÜNLÜ Epoxy Topcoat Paint is applied as a top coat on the product. 

• Density (20°C, gr/cm³):  1.52 – 1.60 (depending on color)
• Drying time (20°C)       
• Dust-free drying time: 20-30 minutes 
• Dry-to-touch time: 1-2 hours
• Layer application process: 8-24 hours
• Full drying time: 7 days 
• Solids: 72.0 – 80.0 (depending on color)
• Thinner: Epoxy Thinner (971-0771)
• For spray applications: 20-25%
• For roller applications: 15-20%
• For brush applications: 10-15%
• Hardener: 849-0040
• Mixing ratio: 3/1
• Pot life (20° C): 7-8 hours
• Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 8-10 m² can be covered with 1 liter (excluding losses)