Search

Manufacture products

Solvent Free Epoxy Varnish

Product code:865-0098

Ünlü Solvent Free Epoxy Varnish is a two component solvent-free system based on epoxy resin and polyamide curing agent. It has good adhesion performance. It provides excellent resistance to a wide range of chemical, solvents and oils. It has good protection for steel, concrete and wooden surfaces.

Place of use

It used in industrial facilities, metal constructions, refineries, petrochemical plants, piers, bridges and ports, fertilizer, acid, paper, sugar and other chemical industry, water treatment plants, food such as milk and food industry metal, concrete floors and walls to cover etc.

Technical Information

Density (20°C , gr/cm³ ) : 0,98-1,02
Drying Time (20°C) :  
    Touch dry: 6-7 hours
    Thoroughly Drying : 7 day
Soldi Matter : 100
Hardener : 869-0080
Mixing Ratio ( By weight ) : 1,7 /1
Pot Life (20° C) : 20-30 minutes
Coverage : 0,125 – 0,250 kg/m2 for each coat. Recommended application thickness is 125-250 micron.

Instructions

Surface treatment for wood surfaces: The surface should be dry, clean and well sanded prior to varnish application.                                                                 

Surface treatment for steel surfaces: The surface should be free from dust, dirt fat, roll shells and rust. ÜNLÜ SOLVENT-FREE EPOXY VARNISH (865-0098) is applied to build up a DFT of 70-100 microns.

Surface treatment for concrete surfaces: The surface should be cleaned, dry and free from oil, dirt, old paint  is removed  using scraper. Recently applied concrete should be completely cured before applying the paint. Allow surfaces to dry if wet. Always confirm preparation adequacy. After surface treatments, ÜNLÜ SOLVENT-FREE EPOXY VARNISH (865-0098) is mixed with hardener at the ratio mentioned above and thorougly mixed. Prepared varnish is applied by  appropriate  roller or brush.

Solvent Free Epoxy Varnish / Epoxy paint and primer / Manufacture products / Products - Katsan Group

Search

Manufacture products

Solvent Free Epoxy Varnish

Product code:865-0098

Ünlü Solvent Free Epoxy Varnish is a two component solvent-free system based on epoxy resin and polyamide curing agent. It has good adhesion performance. It provides excellent resistance to a wide range of chemical, solvents and oils. It has good protection for steel, concrete and wooden surfaces.

Place of use

It used in industrial facilities, metal constructions, refineries, petrochemical plants, piers, bridges and ports, fertilizer, acid, paper, sugar and other chemical industry, water treatment plants, food such as milk and food industry metal, concrete floors and walls to cover etc.

Technical Information

Density (20°C , gr/cm³ ) : 0,98-1,02
Drying Time (20°C) :  
    Touch dry: 6-7 hours
    Thoroughly Drying : 7 day
Soldi Matter : 100
Hardener : 869-0080
Mixing Ratio ( By weight ) : 1,7 /1
Pot Life (20° C) : 20-30 minutes
Coverage : 0,125 – 0,250 kg/m2 for each coat. Recommended application thickness is 125-250 micron.

Instructions

Surface treatment for wood surfaces: The surface should be dry, clean and well sanded prior to varnish application.                                                                 

Surface treatment for steel surfaces: The surface should be free from dust, dirt fat, roll shells and rust. ÜNLÜ SOLVENT-FREE EPOXY VARNISH (865-0098) is applied to build up a DFT of 70-100 microns.

Surface treatment for concrete surfaces: The surface should be cleaned, dry and free from oil, dirt, old paint  is removed  using scraper. Recently applied concrete should be completely cured before applying the paint. Allow surfaces to dry if wet. Always confirm preparation adequacy. After surface treatments, ÜNLÜ SOLVENT-FREE EPOXY VARNISH (865-0098) is mixed with hardener at the ratio mentioned above and thorougly mixed. Prepared varnish is applied by  appropriate  roller or brush.