Galvanized primer prepares the surface to increase the adhesion of the primer and topcoats to be applied later. Before application, the surface must be cleaned of oil, rust, dust, and dirt. After it is brought to the application viscosity with cellulosic thinner, the film thickness should not exceed 20 microns.

• Density (20°C, gr/cm³): 1.02 – 1.06 (depending on color)
• Drying time (20°C):      
• Dust-free drying time: 3-5 minutes 
• Dry-to-touch time: 6-8 minutes 
• Layer application process: 2-3 hours
• Solids: 40.0 – 44.0 (depending on color)
• Thinner: Cellulosic Super thinner (961-0631)
• Thinning ratio: 30-40%
• Coating capacity: When applied to leave a dry film thickness of 15-20 µ in one coat, an area of 13-15 m² can be covered with 1 liter (excluding losses).

Galvanized primer prepares the surface to increase the adhesion of the primer and topcoats to be applied later. Before application, the surface must be cleaned of oil, rust, dust, and dirt. After it is brought to the application viscosity with cellulosic thinner, the film thickness should not exceed 20 microns.

• Density (20°C, gr/cm³): 1.02 – 1.06 (depending on color)
• Drying time (20°C):      
• Dust-free drying time: 3-5 minutes 
• Dry-to-touch time: 6-8 minutes 
• Layer application process: 2-3 hours
• Solids: 40.0 – 44.0 (depending on color)
• Thinner: Cellulosic Super thinner (961-0631)
• Thinning ratio: 30-40%
• Coating capacity: When applied to leave a dry film thickness of 15-20 µ in one coat, an area of 13-15 m² can be covered with 1 liter (excluding losses).