Search

Manufacture products

Acrylic 4+1 PAINT

Product code:341-1001

Acrylic 4+1 PAINT is a two-component, acrylic-based, and reaction-cured topcoat paint. Acrylic 4+1 Paint leaves a hard, glossy, plump, and non-yellowing film. It has very high gloss permanence, elasticity, mechanical durability and chemical resistance. The product can be air-dried or oven-cured.
 

Place of use

Acrylic 4+1 Paint is used in metal and commercial vehicle industries where high quality is required. It adheres perfectly to aluminum and galvanized surfaces without the need for special primer application.

Instructions

After being componentized in the specified ratio, it is thinned with Acrylic Thinner (024-0256) and applied in two/three cross coats on the surfaces prepared beforehand.

Technical information

  • Density (20°C, gr/cm³): 0.95 – 1.35 (depending on color)
  • Drying time (20°C):      
  • Dust-free drying time: 15-20 minutes 
  • Dry-to-touch time: 60-70 minutes 
  • Full drying: 24 hours (30 min. flash off + 30 min. 80°C)
  • Solids: 45.0 – 65.0
  • Thinner: Acrylic thinner (369-0053)
  • Thinning ratio: 20-30%
  • Gloss: > 90
  • Hardener: 024-025
  • Mixing ratio (Weight): 4/1
  • Pot life (20° C): 7-8 hours 
  • Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 9-11 m² can be covered with 1 liter (excluding losses).
Acrylic 4+1 PAINT / Special system products / Manufacture products / Products - Katsan Group

Search

Manufacture products

Acrylic 4+1 PAINT

Product code:341-1001

Acrylic 4+1 PAINT is a two-component, acrylic-based, and reaction-cured topcoat paint. Acrylic 4+1 Paint leaves a hard, glossy, plump, and non-yellowing film. It has very high gloss permanence, elasticity, mechanical durability and chemical resistance. The product can be air-dried or oven-cured.
 

Place of use

Acrylic 4+1 Paint is used in metal and commercial vehicle industries where high quality is required. It adheres perfectly to aluminum and galvanized surfaces without the need for special primer application.

Instructions

After being componentized in the specified ratio, it is thinned with Acrylic Thinner (024-0256) and applied in two/three cross coats on the surfaces prepared beforehand.

Technical information

  • Density (20°C, gr/cm³): 0.95 – 1.35 (depending on color)
  • Drying time (20°C):      
  • Dust-free drying time: 15-20 minutes 
  • Dry-to-touch time: 60-70 minutes 
  • Full drying: 24 hours (30 min. flash off + 30 min. 80°C)
  • Solids: 45.0 – 65.0
  • Thinner: Acrylic thinner (369-0053)
  • Thinning ratio: 20-30%
  • Gloss: > 90
  • Hardener: 024-025
  • Mixing ratio (Weight): 4/1
  • Pot life (20° C): 7-8 hours 
  • Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 9-11 m² can be covered with 1 liter (excluding losses).