It is an epoxy resin-based, two-component, surface-tolerant, high build, self-priming mastic coating containing zinc phosphate, cured with a modified polyamine hardener. It can be applied in high film thicknesses, adheres very well to the applied surface and gives a flexible film.
It can be applied to all metal surfaces. It has been developed as a protective coating for new steel surfaces and solid and old painted surfaces. It can also be applied to damp surfaces. It is used as a high build surface tolerance single coat coating of protective paint systems where UV resistance is not important. It is used as a primer/undercoat where UV resistance is important. It is used as a single layer coating on structural steels, bridges, underwater and above water parts of metal surfaces, underwater surfaces of ships, chemical industry facilities.
| Yoğunluğu (20°C , gr/cm³ ) | : | 1,30 - 1,50 (renge göre değişir) |
| Kuruma Süresi (20°C) | : | |
| Toz kuruma : 6-7 saat | ||
| Tam kuruma : 7 gün | ||
| Katı Maddde | : | 80,0 - 84,0 (renge göre değişir) |
| Tiner | : | Epoksi Tiner (971-0711) |
| İncelme Oranı | : | % 10-15 |
| Parlaklık (gloss) | : | Yarı Mat |
| Sertleştirici | : | Epoksi Sertleştirici (849-0085) |
| Karışım Oranı ( Ağırlıkça ) | : | 7/1 |
| Karışım Ömrü (20° C) | : | 2 saat |
| Boyanabilme Alanı | : | 100 µ kuru film kalınlığı bırakacak şekilde uygulandığında 1 kg ile 6 m² alan kaplanabilir. (Kayıplar hariç) |
It is applied as a spray (air-airless spray). All surfaces to be painted must be clean and dry. After 13-14 hours, the top coat of paint can be applied by patting and sanding. Recommended application thickness: 100 µ kfk (dry film thickness)
