Search

Manufacture products

Surface Tolerant Coating

Product code:822-7702

It is an epoxy resin-based, two-component, surface-tolerant, high build, self-priming mastic coating containing zinc phosphate, cured with a modified polyamine hardener. It can be applied in high film thicknesses, adheres very well to the applied surface and gives a flexible film.

Place of use

It can be applied to all metal surfaces. It has been developed as a protective coating for new steel surfaces and solid and old painted surfaces. It can also be applied to damp surfaces. It is used as a high build surface tolerance single coat coating of protective paint systems where UV resistance is not important. It is used as a primer/undercoat where UV resistance is important. It is used as a single layer coating on structural steels, bridges, underwater and above water parts of metal surfaces, underwater surfaces of ships, chemical industry facilities.

Technical Information

Density (20°C , gr/cm³ ) : 1,30 - 1,50 (depending on color)
Drying Time (20°C) :  
    Powder drying : 6-7 hours
    Full drying : 7 days
Solid Matter : 80,0 - 84,0 (depends on color)
Thinner : Epoxy Thinner (971-0711)
Thinning Rate : % 10-15
Gloss : Semi Matte
Hardener : Epoxy Hardener (849-0085)
Mixing Ratio ( By Weight ) : 7/1
Pot Life (20° C) : 2 hours
Paintable Area : When applied with a dry film thickness of 100 µ, an area between 1 kg and 6 m² can be covered. (Excluding losses)

Instructions

It is applied as a spray (air-airless spray). All surfaces to be painted must be clean and dry. After 13-14 hours, the top coat of paint can be applied by patting and sanding. Recommended application thickness: 100 µ kfk (dry film thickness)