Поиск

Промышленные товары

Surface Tolerant Coating

Код товара:822-7702

It is an epoxy resin-based, two-component, surface-tolerant, high build, self-priming mastic coating containing zinc phosphate, cured with a modified polyamine hardener. It can be applied in high film thicknesses, adheres very well to the applied surface and gives a flexible film.

Place of use

It can be applied to all metal surfaces. It has been developed as a protective coating for new steel surfaces and solid and old painted surfaces. It can also be applied to damp surfaces. It is used as a high build surface tolerance single coat coating of protective paint systems where UV resistance is not important. It is used as a primer/undercoat where UV resistance is important. It is used as a single layer coating on structural steels, bridges, underwater and above water parts of metal surfaces, underwater surfaces of ships, chemical industry facilities.

Technical Information

Yoğunluğu (20°C , gr/cm³ ) : 1,30 - 1,50 (renge göre değişir)
Kuruma Süresi (20°C) :  
    Toz kuruma : 6-7 saat
    Tam kuruma : 7 gün
Katı Maddde : 80,0 - 84,0 (renge göre değişir)
Tiner : Epoksi Tiner (971-0711)
İncelme Oranı : % 10-15
Parlaklık (gloss) : Yarı Mat
Sertleştirici : Epoksi Sertleştirici (849-0085)
Karışım Oranı ( Ağırlıkça ) : 7/1
Karışım Ömrü (20° C) : 2 saat
Boyanabilme Alanı : 100 µ kuru film kalınlığı bırakacak şekilde uygulandığında 1 kg ile 6 m² alan kaplanabilir. (Kayıplar hariç)

Instructions

It is applied as a spray (air-airless spray). All surfaces to be painted must be clean and dry. After 13-14 hours, the top coat of paint can be applied by patting and sanding. Recommended application thickness: 100 µ kfk (dry film thickness)