Wooden surface is sanded properly and cleaned from dust before the application. Depending on the application method, it should be brought to proper viscosity. Acccording to the required film thickness, it should be applied as 2 coats with 30 min. intervals between each layer. It has to be  sanded after min.four hours and then clear topcoat must be applied, the surface must be first sanded with sandpaper grid no:220 and the with sandpaper grid no:400 to prepare the surface for pigmented topcoat application.

• Density (20°C , gr/cm³ ) : 1,05 - 1,09
• Soldi Matter  : 60,0-64,0
• Thinner : NC Thinner (961-0631)
• Dilution Ratio  : 100/2/2/5-10
• Hardener : 819-0025
• Mixing Ratio ( By weight ) : 814-0061 1 kg, 859-0007 20 ml, 819-0025 20 ml
• Pot Life (20° C) : 7-9 minutes
• Coverage : An area of 8-10 m² is coated by using 1 lt of this product remains a dry film of 45-50 µ (excluding application loss)

 Wooden surface is sanded properly and cleaned from dust before the application. Depending on the application method, it should be brought to proper viscosity. Acccording to the required film thickness, it should be applied as 2 coats with 30 min. intervals between each layer. It has to be  sanded after min.four hours and then clear topcoat must be applied, the surface must be first sanded with sandpaper grid no:220 and the with sandpaper grid no:400 to prepare the surface for pigmented topcoat application.

• Density (20°C , gr/cm³ ) : 1,05 - 1,09
• Soldi Matter  : 60,0-64,0
• Thinner : NC Thinner (961-0631)
• Dilution Ratio  : 100/2/2/5-10
• Hardener : 819-0025
• Mixing Ratio ( By weight ) : 814-0061 1 kg, 859-0007 20 ml, 819-0025 20 ml
• Pot Life (20° C) : 7-9 minutes
• Coverage : An area of 8-10 m² is coated by using 1 lt of this product remains a dry film of 45-50 µ (excluding application loss)