Search

Polyester System Products

Polyester Primer

Product code:812-Seri

It is an air drying, polyester based primer.

Place of use

POLYESTER PRIMER is formulated as primer for internal use on solid wood and MDF with the purpose of decoration. It allows NC, polyurethane and acrylic primer to be applied on it.

Instructions

Wooden surface is sanded properly and cleaned from dust before the application. Depending on the application method, it should be brought to proper viscosity. According to the required film thickness, it should be applied as 2 coats with 30 min. intervals between each layer. It has to be  sanded after min.four hours and then clear topcoat must be applied, the surface must be first sanded with sandpaper grid no:220 and the with sandpaper grid no:400 to prepare the surface for pigmented topcoat application.  

Technical information

  • Density (20°C , gr/cm³ ) : 1,48 - 1,52
  • Soldi Matter : 81,0 - 85,0 (Depends on color)
  • Thinner : NC Thinner (961-0631)
  • Hardener : 819-0025
  • Mixing Ratio ( By weight )  : 812-series 1 kg, 859-0007 20 ml, 819-0025 20 ml
  • Pot Life (20° C)  : 10-12 minutes
  • Coverage : An area of 6-8 m² is coated by using 1 lt of this product remains a dry film of 65-70 µ (excluding application loss)
Polyester Primer / Polyester System Products / Furniture products / Products - Katsan Group

Search

Polyester System Products

Polyester Primer

Product code:812-Seri

It is an air drying, polyester based primer.

Place of use

POLYESTER PRIMER is formulated as primer for internal use on solid wood and MDF with the purpose of decoration. It allows NC, polyurethane and acrylic primer to be applied on it.

Instructions

Wooden surface is sanded properly and cleaned from dust before the application. Depending on the application method, it should be brought to proper viscosity. According to the required film thickness, it should be applied as 2 coats with 30 min. intervals between each layer. It has to be  sanded after min.four hours and then clear topcoat must be applied, the surface must be first sanded with sandpaper grid no:220 and the with sandpaper grid no:400 to prepare the surface for pigmented topcoat application.  

Technical information

  • Density (20°C , gr/cm³ ) : 1,48 - 1,52
  • Soldi Matter : 81,0 - 85,0 (Depends on color)
  • Thinner : NC Thinner (961-0631)
  • Hardener : 819-0025
  • Mixing Ratio ( By weight )  : 812-series 1 kg, 859-0007 20 ml, 819-0025 20 ml
  • Pot Life (20° C)  : 10-12 minutes
  • Coverage : An area of 6-8 m² is coated by using 1 lt of this product remains a dry film of 65-70 µ (excluding application loss)