Before applying any kind of road marking paint, the surface must be cleaned of dust, dirt, gravel, etc. In the applications of painting paving stones, first of all, the broken and missing parts must be corrected or replaced. For marking road lines, the application must not be made on loose surfaces as much as possible. The application should be done on a clean and dry asphalt surface, provided that the temperature of the environment and the asphalt is a minimum of 15˚C and the relative humidity is a maximum of 85% in environmental conditions without precipitation and breeze. After the Road Marking Paint is brought to the application viscosity with its special thinner, it is applied directly to the floor with a brush, roller, or automatic road marking equipment. The product must be protected from pedestrian and vehicle traffic before it is dry to the touch (15 minutes at 25˚C).

• Density (20°C, gr/cm³): 1.47 – 1.51 (depending on color)
• Drying time (20°C):      
• Dust-free drying time: 5-7 minutes 
• Dry-to-touch time: 15-20 minutes 
• Solids: 68.0 – 72.0 (depending on color)
• Thinner: Road Marking Paint Thinner (951-0451)
• Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 8-10 m² can be covered with 1 liter (excluding losses).

Before applying any kind of road marking paint, the surface must be cleaned of dust, dirt, gravel, etc. In the applications of painting paving stones, first of all, the broken and missing parts must be corrected or replaced. For marking road lines, the application must not be made on loose surfaces as much as possible. The application should be done on a clean and dry asphalt surface, provided that the temperature of the environment and the asphalt is a minimum of 15˚C and the relative humidity is a maximum of 85% in environmental conditions without precipitation and breeze. After the Road Marking Paint is brought to the application viscosity with its special thinner, it is applied directly to the floor with a brush, roller, or automatic road marking equipment. The product must be protected from pedestrian and vehicle traffic before it is dry to the touch (15 minutes at 25˚C).

• Density (20°C, gr/cm³): 1.47 – 1.51 (depending on color)
• Drying time (20°C):      
• Dust-free drying time: 5-7 minutes 
• Dry-to-touch time: 15-20 minutes 
• Solids: 68.0 – 72.0 (depending on color)
• Thinner: Road Marking Paint Thinner (951-0451)
• Coating capacity: When applied to leave a dry film thickness of 45-50 µ in one coat, an area of 8-10 m² can be covered with 1 liter (excluding losses).