It is an epoxy resin-based, two-component, surface-tolerant, high build, self-priming mastic coating containing zinc phosphate, cured with a modified polyamine hardener. It can be applied in high film thicknesses, adheres very well to the applied surface and gives a flexible film.
It can be applied to all metal surfaces. It has been developed as a protective coating for new steel surfaces and solid and old painted surfaces. It can also be applied to damp surfaces. It is used as a high build surface tolerance single coat coating of protective paint systems where UV resistance is not important. It is used as a primer/undercoat where UV resistance is important. It is used as a single layer coating on structural steels, bridges, underwater and above water parts of metal surfaces, underwater surfaces of ships, chemical industry facilities.
|Density (20°C , gr/cm³ )||:||1,30 - 1,50 (depending on color)|
|Drying Time (20°C)||:|
|Powder drying : 6-7 hours|
|Full drying : 7 days|
|Solid Matter||:||80,0 - 84,0 (depends on color)|
|Thinner||:||Epoxy Thinner (971-0711)|
|Thinning Rate||:||% 10-15|
|Hardener||:||Epoxy Hardener (849-0085)|
|Mixing Ratio ( By Weight )||:||7/1|
|Pot Life (20° C)||:||2 hours|
|Paintable Area||:||When applied with a dry film thickness of 100 µ, an area between 1 kg and 6 m² can be covered. (Excluding losses)|
It is applied as a spray (air-airless spray). All surfaces to be painted must be clean and dry. After 13-14 hours, the top coat of paint can be applied by patting and sanding. Recommended application thickness: 100 µ kfk (dry film thickness)