The product must be applied to dry surfaces cleaned of dust and oils. After obtaining a homogeneous mixture by adding the recommended thinner to the paint, the product must be applied over Rapid Primer (No. 442). In cases where more than one layer application is desired without wet application, light sanding should be applied if 72 hours pass between the layers.

• Density (20°C, gr/cm³): 0.98 – 1.38 (depending on color)
• Drying time (20°C)      
• Dust-free drying time: 8-10 minutes
• Dry-to-touch time: 15-20 minutes
• Full drying time: 7 days
• Solids: 44.0 – 54.0 (depending on color)
• Thinner: Industrial thinner (941-0412)
• Coating capacity: When applied to leave a dry film thickness of 40-45 µ in one coat, an area of 10-12 m² can be covered with 1 liter (excluding losses)

The product must be applied to dry surfaces cleaned of dust and oils. After obtaining a homogeneous mixture by adding the recommended thinner to the paint, the product must be applied over Rapid Primer (No. 442). In cases where more than one layer application is desired without wet application, light sanding should be applied if 72 hours pass between the layers.

• Density (20°C, gr/cm³): 0.98 – 1.38 (depending on color)
• Drying time (20°C)      
• Dust-free drying time: 8-10 minutes
• Dry-to-touch time: 15-20 minutes
• Full drying time: 7 days
• Solids: 44.0 – 54.0 (depending on color)
• Thinner: Industrial thinner (941-0412)
• Coating capacity: When applied to leave a dry film thickness of 40-45 µ in one coat, an area of 10-12 m² can be covered with 1 liter (excluding losses)